Specifications Name Nano blue sprayer Voltage 110V/60Hz Power 1200w Packing size 41*25*21cm Net weight 3.5kg Instructions 1. When using this machine, please use pure water or distilled water. It is strictly forbidden to add flavor liquids or use tap water, which will cause blockage inside the machine and seriously affect the service life of the machine. 2. Turn on the power and turn on the power switch. The mist outlet of the nano-sprinkler must face the ground, not people and electrical equipment, so as to avoid unnecessary damage. Depending on the water temperature, the waiting time for spraying the mist is different. Normal temperature water generally waits for 1-2 minutes. 3. The indicator light is on and spraying starts. Note that the spray port should not be too close to human skin, so as to avoid the high temperature mist from harming people. Maintenance and cleaning instructions Be sure to clean the internal pipes of the machine every 30 hours of use to prevent the pipes from being blocked. the cleaning method: 1. Pour out the water in the water bottle and add white vinegar (white vinegar cannot be diluted). Then, like the normal working process, start the machine, white vinegar enters the machine and sprays out, which means that the pipe is being cleaned. Wash for at least 20 minutes. After cleaning, you need to clean the white vinegar left in the water bottle of the machine, and pour the bottle of pure water, start the machine again, clean the white vinegar left in the machine, and spray a bottle of pure water. 2. After each use, turn the machine to the maximum gear, unscrew the nozzle to spray a pot of water, spray the kettle in the pipe and then turn it off to avoid residual scale.